LIGHTING PACKAGES
Give your party that unique touch with one of our lighting packages. From mild to wild, elegant to outlandish, one of our lighting packages is sure to fit your tastes and budget.
Dance to the Music
- 10' Triangular Aluminum Trussing (maximum) supported by 11' crank stands*
- Four PAR 56 lights (Flood lights of various colors connected to Sequenced Chase Controller that flash to beat of the music)
- Two Jewel Lights (Projects multiple sharp beams of white light that rotate to the beat of the music)
- One Vertigo Light (30 beams of colored light that dance back and forth to the music)
- One Derby or Avenger light (20 flat beams of light that rock back and forth to the music)
- One Rainbow Mini Star Light (Tunnel of dichroic beams that rotate to the music)
- One Lyte Quest Gobo 4 (Projects 4 colored gobo patterns that rotate and change on the wall, ceiling or floor)
- One Fog machine (Enhances the lights making the beams visible from all angles Venue approved)
* If venue does not accommodate lighting truss, tripod light stands may be substituted.
Atmosphere
- Two 15' Vertical Triangular Aluminum Truss Towers
- Up lighting with choice of color or white
- Six Martin Mini-Mac Profile Spotlights (3 per tower)
Original
- 15' Triangular Aluminum Trussing (maximum) supported by 11' crank stands
- Four Martin 812 MKII Scanners
- Four Genie Shiva 250 Scanners
- Two Martin Voyager, Moon Flower or similar (semi-intelligent)
- Eight Robo Colors
Essential
- 20' Triangular Aluminum Trussing (maximum) supported by 16' crank stands
- Four Martin 812 MKII Scanners
- Four Martin 518 II Scanners
- One Martin Mac-250 Plus or Coemar Pro Spot 250
- One Martin Synchro-Zap or similar (semi-intelligent)
- One Martin Mini-Macs (2) hanging (2) floor
- One Par 56's, four on each side, mounted on Tri Pod Lighting Stands
Ultimate - Same as "Essential" plus:
- 30' Triangular Aluminum Trussing
- Two additional Martin Mini-Macs (hanging)
- Two Additional Coemar Pro Spot 250 (plus the Martin Mac-250 Plus)
Options
- Dance Platforms (4'x3') x 4
- Dance Cages (5'x5')
- Black Light w/up to 144 gloves
- Torch Lights
Lighting Show may substitute instruments with equal or greater value.
STAGE AND POWER REQUIREMENTS
STAGE AND POWER MUST BE PROVIDED BY CLIENT OR VENUE
Dance to the Music (Pizazz Full light show)
Power Requirements:
- One dedicated 20-amp circuit.
Atmosphere
Power Requirements:
- Two dedicated 20-amp circuit, one for each Tower.
Original
Power Requirements:
- Power drop with break out box or equivalent and a minimum of (5) five separate 20-amp circuits within 10 feet of the staging area.
Stage Requirements (Light show set up time 3-5 hours):
- DJ equipment and light show on stage or riser. 20' wide by 8' deep (min.)
- Floor area needed without a stage or riser. 15' wide by 8' deep (min.)
Essential
Power Requirements:
- Power drop with break out box or equivalent and a minimum of six separate 20-amp circuits within 10 feet of the staging area.
Stage Requirements (Light show set up time 3-5 hours):
- DJ equipment and light show on stage or riser. 24' wide by 10' deep (min.)
- Floor area needed without a stage or riser. 20' wide by 8' deep (min.)
Ultimate
Power Requirements:
- Power drop with break out box or equivalent and a minimum of six separate 20-amp circuits within 10 feet of the staging area.
Stage Requirements (Light show set up time 3-5 hours):
- DJ equipment and light show on stage or riser. 34' wide by 12' deep (min.)
- Floor area needed without a stage or riser. 30' wide by 10' deep (min.)
NOTE: If function is to be held outside:
- The staging area needs to be covered for protection from the elements.
- There must be a floor or stage that is level and dry.
- DJ/lighting equipment cannot be set on the grass or anywhere there is moisture.
- Staging area requirements are approximated for an average DJ or 5-8 piece band. Larger acts may require more space.
Different staging scenarios are possible, but MUST be discussed before lighting crew arrives at venue.
